User`s guide
USER’S GUIDE
146 SFVRA Connection Manager
3. Configure CyberSWITCH Properties.
On the Properties tab, enter
BRIDGE_CSX
for the CyberSWITCH Name. Enter
128.1.1.1
for
the IP Address. Enter
2000
for the TCP Port. Select
REMOTE_BRIDGE
as the CyberSWITCH
Group. Enter
8
for the Number of ISDN Channels. The Properties tab will appear as follows:
4. Click Add and then Close.
5. Click Close on the CyberSWITCH List dialog.
CONFIGURE USER RECORDS
Note: The Client interface should be activated before proceeding the following steps.
This network has remote users, and the user information for each of those users must be
configured. Each user must have a unique name. These users will be configured without call
restrictions. Device level security is used in conjunction with Calling Line ID’s.
1. On the Functions menu, select Users, or click on the toolbar. The User List dialog is then
displayed as follows: