User`s guide

SFVRA Connection Manager 137

ONVERT

Convert System Messages

users processed and added to the database. The “x” indicates the number of user names read from

the .NEI file by Convert, while “y” represents the number of users actually added to the database.

Convert: 1008 Error adding user to database. Failure occurred at User Name: <User Name>. User Record(s)

processed: <x>. User Record(s) added to the Database: <y>.

Indicates that Convert was unable to add a user from the NETWORK.NEI file or the DEVDB.NEI

file to the database because it was unable to access the database or the file is corrupt. Ensure that

the database is running, and that the LAN is functioning properly, if applicable. The “x” indicates

the number of user names read from the .NEI file by Convert, while “y” represents the number of

users actually added to the database.

Convert: 1009 Error adding user to database. Failure occurred at User Name: <User Name>. IP Record(s)

processed: <x>. IP Record(s) added to the Database: <y>.

Indicates that Convert was unable to add a static route for a user from the IP.NEI file to the database

because it was unable to access the database or the file is corrupt. Ensure that the database is

running, and that the LAN is functioning properly, if applicable. The “x” indicates the number of

user names read from the IP.NEI file by Convert, while the “y” represents the number of static

routes actually added to the database.

Convert: 1010 Error adding user to database. Failure occurred at User Name: <User Name>. User Record(s)

processed: <x>. User Record(s) added to the Database: <y>.

Indicates that Convert was unable to add a user from the data file to the database because it was

unable to access the database or the file is corrupt. Ensure that the database is running, and that the

LAN is functioning properly, if applicable. The “x” indicates the number of user names read from

the data file by Convert, while “y” represents the number of users actually added to the database.

Convert: 1011 Invalid time format. Enter time in the format “hh:mm.”

Call Restrictions configuration error. The time format is based on a 24 hour clock, where hh stands

for 00 to 23 and mm stands for 00 to 60.

Convert: 1012 Error reading data file. Failure occurred at User Name <User Name>.

Indicates that Convert was unable to process the remaining users after <User Name> because it

encountered an error. Ensure that the data file is correctly delineated and has not been corrupted.

WARNING MESSAGES

Warning messages signal events that you should investigate. These messages are indicated by

on the dialog box, and may be normal during certain network conditions, or they may

indicate a problem. The SFVRA Connection Manager should continue to operate after posting a

warning message. There are currently no warning messages for the Convert application.