User`s guide

SFVRA Connection Manager 113
S YSTEM M ESSAGES
Client Interface Messages
to view or change any information. We recommend that you upgrade the SFVRA database before
upgrading the SFVRA-CONN Clients to avoid this error.
Note: Version 2 Client software can only connect to version 2 of the SFVRA database.
SFVRA Connection Manager: 1002 System Information is unavailable at this time.
The User Data Source is not defined as a valid user of a trusted SQL server connection, or the
connection to the SQL Server has been dropped since the last action. Ensure under the Control
Panel, 32-bit ODBC, that the User Data Source for “SFVRA” does not have the “Use Trusted
Connection” box checked, or that the server allows this user with a Trusted Connection.
SFVRA Connection Manager: 1003 The Base Data Rate cannot be 56000 while H0 Call Support is enabled.
H0 Call support demands a Base Data Rate of 64000 bps. If you need a Base Data Rate of 56000 bps,
disable H0 Call Support first.
SFVRA Connection Manager: 1004 IP Address cannot be NULL.
The IP Address of the CyberSWITCH’S LAN port must be included before the CyberSWITCH can
be added to the database as a Remote Access Switch. The SFVRA service will be unable to locate
the CyberSWITCH without an IP Address.
SFVRA Connection Manager: 1005 TCP Port cannot be NULL.
The TCP Port number is used by the SFVRA service to establish a connection with the
CyberSWITCH and must be included before the CyberSWITCH can be added to the database as a
Remote Access Switch.
SFVRA Connection Manager: 1006 Reserved ISDN channels exceeds number of ISDN channels.
The number of channels reserved for Priority Users cannot exceed the number of channels available
within a connection type.
SFVRA Connection Manager: 1007 Reserved Modem channels exceeds number of Modem channels.
The number of channels reserved for Priority Users cannot exceed the number of channels available
within a connection type.
SFVRA Connection Manager: 1008 Start IP Address cannot be NULL.
A Start IP Address must be defined before IP Pool Addressing is enabled.
SFVRA Connection Manager: 1009 End IP Address cannot be NULL.
An End IP Address must be defined before IP Pool Addressing is enabled.
SFVRA Connection Manager: 1010 Start IP Address must be less than the End IP Address.
The IP Pool Addressing function failed. Reconfigure the address pool range so that the Start IP
Address is less than the End IP Address.
SFVRA Connection Manager: 1011 From month cannot be greater than To month.
Invalid time frame. Reconfigure the time frame so that the “From” occurs before the “To” in the
calendar year.
SFVRA Connection Manager: 1012 From year cannot be greater than To year.
Invalid time frame. Reconfigure the time frame so that the “From” year is less than or equal to the
“To” year.