Specifications

Chassis Group Views Chassis Views
SPECTRUM Enterprise Manager 56 of 72 Bay Networks Accelar
Connector Type
The type of connector installed on this port. The
default value is nonRedundant. Possible values
are nonRedundant and redundant.
Perform Routing
Displays whether this port should perform
routing. The default is to not route.
High Priority
Displays whether this port should treated with
high priority. The default is to not have a high
priority.
Action
Displays actions for the port to take. The default
value is none. Possible values and their meanings
are:
Result
Displays results from the last action. The default
value is none. Possible values and their meanings
are:
Primary Connector
For ports configured with redundant connectors,
this indicates which to use as the active
connector the next time the port turned on. The
default value is left. Possible values are left, right,
and other.
Active Connector
For ports configured with redundant connectors,
this indicates which is currently active. Only one
connector can be active. The default value is left.
Possible values are left, right, and other.
Table 15: Port Actions
Value Meaning
none None of the following.
flushMacFdb Flush MAC forwarding table.
flushArp Flush ARP table.
flushIp Flush IP route table.
flushAll Flush all tables.
Table 16: Port Action Results
Value Meaning
none None of the following.
inProgress Action is in progress.
success Action has successfully finished.
fail Action has failed.