Specifications

Application View Supported Applications
SPECTRUM Enterprise Manager 42 of 72 Bay Networks Accelar
A 0 indicates that the port number has not been
learned but that the bridge does have some
forwarding or filtering information about this
address.
Monitor
Displays whether monitoring should be
performed on this unicast MAC address. If
monitoring is enabled, any packet received with a
matching destination MAC address will be
forwarded to the port configured to receive
monitor traffic.
Priority
The priority of the incoming frames with this
destination MAC Address. The default is low.
Possible values are low and high.
Bridge Static Table View
Access: From the Icon Subviews menu for the
AccelarApp Application icon, select Bridge > Static
Table.
This table contains forwarding information about
unicast entries configured into the bridge by
management. This information is used to
determine how to propagate a received frame.
Static Table Size
The number of entries in the bridge static table.
Address
The MAC address of this entry.
Port
The port on which the MAC address is found.
Monitor
Displays whether monitoring should be done on
incoming packets that match this entry.
Priority
The forwarding priority of incoming packets that
match this entry. The default is low. Possible
values are low and high
Status
The status of this entry. The default is
permanent. Possible values are other, invalid,
permanent, deleteOnReset, and deleteOnTimeout.
Bridge Filter Table View
Access: From the Icon Subviews menu for the
AccelarApp Application icon, select Bridge > Filter
Table.
This table contains filtering information
specifying a destination address on a specific port
and a set of incoming ports. Frames received from
one of the incoming ports and containing the
destination addresses are not forwarded.