Specifications

Application View Supported Applications
SPECTRUM Enterprise Manager 40 of 72 Bay Networks Accelar
STG Port Table View
Access: From the Icon Subviews menu for the
AccelarApp Application icon, select Spanning Tree
Group > STG Port Table.
This table displays spanning tree group port
information. If a port is associated with more than
one spanning tree group, it will have one entry in
this table for each group.
STG Port
The port number used to identify a spanning tree
group.
STG Id
The group identifier to which this port is
assigned.
Priority
The priority of thie port.
State
The port's state as defined by application of the
Spanning Tree Protocol. This controls what action
a port takes on reception of a frame. If the bridge
detects a port that is malfunctioning, it will place
that port into the broken state. Possible values
are: disabled, blocking, listening, learning,
forwarding, and broken.
Enable STP
The status of the port. Possible values are enabled
and disabled.
Fast Start
When this is set, the port is moved straight to the
forwarding state upon being enabled.
Path Cost
The contribution of this port to the total path cost
of paths towards the spanning tree root which
include this port.
Designated Root
The Bridge Identifier of the root Bridge as
recorded in the Configuration BPDUs transmitted
by the Designated Bridge for the segment to
which the port is attached.
Designated Cost
The path cost of the Designated Port of the
segment connected to this port. This value is
compared to the Root Path Cost field in received
bridge PDUs.
Designated Bridge
The Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for this
port's segment.