Specifications

Device View Interface Device View
SPECTRUM Enterprise Manager 12 of 72 Bay Networks Accelar
Network Type Label
Identifies the type of network the interface is
connected to. Double-click to open the Model
Information view for the interface.
Physical Address Label
Displays the physical (MAC) address of the
interface. Double-click to open the Interface
Address Translation table, which cross-references
network addresses (IP addresses) to physical
(MAC) addresses for selected nodes between
networks. Double-clicking on any column entry
opens an address-specific Address Translation
Table Information view. This view provides the
same information as the corresponding row for
the IF Address Translation table, but allows you
to modify field values.
IP Address Label
Displays the IP address for the interface. Double-
click to open the Secondary Address Panel on
Page 14, which allows you to change the address
and mask for this interface.
Gauge Label
Displays whichever performance statistic has
been selected in the Gauge Control panel for this
device’s interfaces (see the SPECTRUM Views
documentation for more information). Double-
click to open the Port Performance View on
Page 64.
Interface Icon Subviews Menu Options
Table 2 lists the Icon Subviews menu options
available for the Interface icon.
Table 2: Interface Icon Subviews
Menu Options
Option Opens the . . .
Detail Interface Detail view, which displays
Packet, Error, and Discard
Breakdown pie charts.
IF Status Interface Status View on Page 13
IF Configuration Interface Configuration View on
Page 13
Model Information Model Information Views on Page 65
IF Address
Translation Table
Interface Address Translation Table
view, which shows the Physical and
Network address for each interface.
Secondary Address
Panel
Secondary Address Panel on Page 14
Thresholds Interface Threshold view, which
allows you to set the on/off alarm
thresholds for: load, packet rate,
error rate, and % discarded.