Specifications

SPECTRUM Software Release Notice (SSRN)
For SPECTRUM 6.5.1
Page 118
Document 0743
Revision 14
June 2002
SynOptics Modules
Management Module Information
MM Part Number Device(s) Firmware Version
SM-SYN1001 HubSyn3FDDI (SynOptics 3000) 5.1.0
SM-SYN1002 HubSynEnet28xx (SynOptics 28xx) 5.3.1
SM-SYN1004 SynOptics 332xS (Enet Bridge) 1.0.0
SM-SYN1005 SynOptics 39xx (FDDI) 2.0.48
SM-SYN1006 SynOptics 28xxx 2.0.3
SM-SYN1008 HubSyn27xx (SynOptics 27xx) 5.11
SM-SYN1009 HubSyn29xx (SynOptics 29xx) 2.2.4
Known Anomalies: SynOptics Modules
Item Description Solution
1 The 3000 Series chassis has one
Ethernet backplane that can be divided
into multiple segments, so more than
one Network Management Module can
exist in the same chassis. The
HubSynSer3xxx Device views show all
the Ethernet modules on the chassis
instead of just the modules on the
segment. Only the modules on the
segment, however, have port
information and configuration capability.
There are no plans to correct this issue.
2 For the BdgSyn332xS model type, the
Syn3EBdgApp’s Ethernet Local Bridge
Filter Table Entry Configuration view
shows an Update Failed error message
when you try to edit the MAC address or
Disposition values.
MAC address and Disposition are read-
only in this view; do not try to change
these fields. There are no plans to
correct this issue.
3 Inaccurate statistics can appear in the
SynOptics Port Performance view.
This is a firmware issue.