Specifications

Device Configuration View
Configuration Views CyberSWITCH Devices (200 Series and 400)
3-2 Management Module Guide
To access these views, do the following:
1. Within the Application view, highlight the appropriate icon.
2. From the Icon Subviews menu:
• of the PPP_Bridge icon, select Configuration;
• of the System icon, select Configuration;
• of the PPP LCP icon, select Configuration;
• of the IP icon, select IP Configuration;
• of the DS1 icon, select DS1 Configuration Table.
Device Configuration View
This view (accessible from the device icon) provides the following
configuration and operating status of this device.
Device Configuration Information
This section of the Configuration view provides device-specific information.
Contact Status
Indicates the establishment of a connection with the device.
The view also provides the following SPMA view buttons which allow you to
configure this device. Refer to the SPECTRUM Portable Management
Application Tools Guide for details on the views accessible from these
buttons.
Opens the Community Name window, which provides information on the
CyberSWITCH Device components.
Opens the TFTP Download view, which enables you to upgrade the firmware
for a CyberSWITCH Device from a TFTP Boot or Bootp Server.
Opens the Trap Table, which allows you to set up your workstation to be
notified of traps received and sent by the CyberSWITCH Device.
Component Table
Download Application
Trap Table