Specifications

Interface Device View
Device Views CyberSWITCH Devices (200 Series and 400)
2-10 Management Module Guide
Port Number Label
This label displays the port number. Double-click this label to open a dialog
box, the Notes for Ethernet 1 MgtRptrPort View. The Notes view attaches a
message to a model or port. You must have write privileges to a model to enter
notes. Refer to the Operator’s Reference for more information.
Port Status Label
This label displays the status of this port. Double-click this label to open the
Port Configuration View. See Chapter 3, Configuration Views, for more
information on this view. Table 2-8 shows the possible states of the port.
Interface Device View
This section describes the Interface icons displayed in the Interface Device
view (accessible from the device icon) and the Interface Options panel. This
view provides dynamic configuration and performance information for each
interface on this device. If the configuration changes, SPECTRUM modifies
the Device view after the next polling cycle to reflect the new configuration.
This view also provides a Device icon which allows you to monitor the device
operation and access other device-specific views. Figure 2-4 shows an example
of the Interface Device view.
Table 2-8. Port Status and Descriptions
Color State Description
Green ACT The module is connected and active.
Blue OFF The module is not connected.
Yellow CON The module is connecting.