Specifications

Chassis Device View

Device Views CyberSWITCH Devices (200 Series and 400)

2-8 Management Module Guide

Interface Labels

These labels represent the interfaces located on the front panel of the device.

They provide access to an Icon Subviews menu and display two information

labels: an Interface Number Label and an Interface Status Label. The Icon

Subviews menu selection for the Interface label is Conﬁguration. It opens

the Conﬁguration dialog box, which allows you to enable or disable the

selected port. See Chapter 1, Introduction, for information on Accessing

SPECTRUM Views.

Interface Number Label

This label displays the interface number (see Figure 2-3).

Interface Status Label

This label displays the status of the port. See Application Label, described

previously in this chapter, for information on selecting the application to be

displayed.

Double-click this label to open the following views:

• for the Physical Application, the CSIIfPort Performance view. Refer to the

Operator’s Reference for a description of Performance views.

• for the Routing Applications, one of the Routing Performance views. Refer

to the Routing Services Management Module Guide for a description

of these Performance views.

Table 2-5, Table 2-6, and Table 2-7 describe the possible states relative to the

application selected.

Table 2-4. Router Applications Icon Subviews Menu

Menu Selection Description

Conﬁguration Opens a submenu with access to various routing

tables described in the Routing Services

Management Module Guide

Model Information Opens the Model Information view described in the

Operator’s Reference.

Basic Conﬁguration Available only for the CtRouter Application. Opens a

window to allow you to conﬁgure the routing services

in your Cabletron device.