Specifications

Syn28CommonApp
Switch Community
Application View SynOptics 28000 Series Switches
6-10 Management Module Guide
Opens the Domain Creation View, described below.
Domain Creation View
This view contains the following information:
Next Available ID
Displays the number for the next domain which is then entered in the Next ID
field below it.
Enter Next ID
Displays the number of the Domain received from the Next Available ID field
above it.
Domain Status
Allows you to create and delete rows in the table. Possible values are “create”
(create a new row), “delete” (deletes an existing row), or “active” (row exists).
A domain cannot be deleted until there are no ports configured as part of that
domain. You must delete all ports participating in this domain from the
lsDomPortTable before deleting this row.
Domain Name
Displays the name of the domain.
MAC Age Time
Displays the time interval used to age out all MAC addresses within this
domain from the Port to MAC mapping table.
The value of zero means to never age out entries. The default value is 300.
Opens the Port Domain View. This view is used to assign a port to a different
domain. This view contains the Port Domain Table which provides the
following information:
Port Domain Table
The Port Domain Table identifies the domain in which every port on each
switch in a switch community is configured.
Only those Domain-Ports information within a switch can be retrieved when
communicating to a non-master switch.
Create Domain
Port Domain