Specifications

9032252 E1 Application View
6-9
Syn28CommonApp
Switch Community
Domain Status
Allows you to create and delete rows in the table. Possible values are “create”
(create a new row), “delete” (deletes an existing row), or “active” (row exists).
A domain cannot be deleted until there are no ports configured as part of that
domain. You must delete all ports participating in this domain from the
lsDomPortTable before deleting this row.
Number of Ports
Displays the current number of ports configured as being part of the domain.
The value zero indicates that the domain exists, but has no ports configured in
it.
MAC Age Time
Displays the time interval used to age out all MAC addresses within this
domain from the Port to MAC mapping table. The default value is 300.
A value of zero means the table never aged out entries.
Total Changes
Displays the total number of configuration changes to this domain such as
adding port or removing port, since warm/cold restart or the previous topology
change.
System Up Time
Displays amount of time system has been running.
Previous Domain ID
Displays the ID number of the previously domain configuration.
Highlight a line in the Domain view and click this button to access the
SynOptics 28xxx Domain Port View. This view contains the Domain Port
Table which identifies all ports on the specified domain.
Only those Domain-Ports information within a switch can be retrieved when
communicating to a non-master switch. An entire Domain-Ports information
within a switch community can be retrieved through the master switch only.
The Domain Port Table contains the following information:
Domain ID
Displays the ID of the domain containing the port.
Switch ID
Displays the unique identifier for the switch containing the port.
Slot
Displays the slot number on the switch identifying the port.
Port
Displays the port number on the switch.
Domain Port