Specifications

Syn28CommonApp
Switch Community
Application View SynOptics 28000 Series Switches
6-8 Management Module Guide
Status
Allows you to create and delete rows in the table. Table 6-2 lists and describes
the possible statuses.
Ports
Displays the current number of ports configured as being part of the domain.
The value zero indicates that the domain exists, but has no ports configured.
Age Time
Displays the time interval (in units of 10 minutes) used to age out all MAC
addresses within this domain from the Port to MAC mapping table. The
default value is 24 (240 minutes).
Configuration Changes
Displays the total number of configuration changes to this domain such as
adding a port or removing a port, since warm/cold restart or the previous
topology change.
Prev ID
Displays the ID of the domain before domain ID collision occurs. The domain
ID collision occurs upon merging switch communities with same domain ID
which was created by different domain management entities. The collided
domain ID will be reassigned to guarantee the uniqueness of domain ID
throughout the switch community.
Highlight a line in the Domain view and click this button to access the
SynOptics 28xxx Domain Configuration View, which contains the following
information.
Domain ID
Displays the unique ID of the domain.
Domain Name
Displays the name of the domain.
Table 6-2. Domain Statuses
Status Description
create creates a new row
delete
Deletes an existing row. A domain cannot be deleted
until there are no ports configured as part of that
domain. You must delete all ports participating in this
domain from the lsDomPortTable before deleting this
row.
active row exists
Domain Configuration