Specifications

Application View
Application View SynOptics 28000 Series Switches
6-2 Management Module Guide
Application View
The Application view allows you to access increasingly detailed views of
network information for the applications supported by this device. You can
view information on any application supported by the SynOptics Switch. Each
application appears as an icon in the Application view. Access application-
specific Model Information views, Performance views, and Detail views from
these icons. Depending on the specific application, various additional views
are also available and are discussed in this section.
Two special options are available for the Application view through the Edit
menu. These menu-choice options interact with the device modeled and are as
follows:
Poll Time
Opens a dialog box that allows entry of the time interval, in seconds, when the
SpectroSERVER reads all the attributes of the device that are marked as
POLLED.
Reconfigure
Polls the device to discover the applications supported by the firmware and
reconfigures the Application view accordingly. Use this option to recover
destroyed application icons.
Application View Modes
Depending on the display mode you choose, the Application view either lists
the supported common and device-specific applications by name or shows
them as icons.
Figure 6-1 shows an example of an Application view in the Icon mode.
Figure 6-2 shows an example of an Application view in the List mode.
To change the display mode, from the View menu select Mode -> List or Icon.
See Chapter 1, Introduction, for information on Accessing SPECTRUM Views
from the Device Icon.