Specifications

Device Events and Alarms
Event and Alarm Messages SynOptics 28000 Series Switches
4-2 Management Module Guide
Device Events and Alarms
Table 4-1 lists the SPECTRUM database directory and file names (in bold)
and the messages displayed for the Event Log and Alarm Manager when
applicable for SynOptics 28000 switches.
Table 4-1. SynOptics 28xxx Switch Events and Alarms
Message in the Event Log
Alarm View Probable Cause
Message
CsEvFormat/Event01770001
{d “%w- %d %m-, %Y - %T”} Fan {T
Syn28xFan 1} has failed on the switch.
- (event [{e}])
CsPCause/Prob01770001
One or more fans on the switch have
died.
CsEvFormat/Event01770002
{d “%w- %d %m-, %Y - %T”} A new
Master Switch is elected, named {m } -
(event [{e}])
CsPCause/Prob01770002
1) The priority of a switch has changed
( the lowest priority is the master ).
2) A new switch has been added to the
switch community.
3) The master switch has been taken
out of the switch community or died.
CsEvFormat/Event01770003
{d “%w- %d %m-, %Y - %T”} A Switch
topology change is detected. - (event
[{e}])
CsPCause/Prob01770003
1) Broken trunk.
2) Newly established trunk.
CsEvFormat/Event01770004
{d “%w- %d %m-, %Y - %T”} An
exceptional event has taken place. {T1 }
- (event [{e}])
CsPCause/Prob01770004
1) Undetermined.