Specifications

What Is in This Chapter
Agent Configuration View
Configuration Views SynOptics 28000 Series Switches
3-10 Management Module Guide
Next Boot Image Load Source
Displays where to get the firmware image for the next time it boots. Possible
values are “local” (stored on the device), “net” (going out to another computer
and getting the image), or “other.”
Image Boot Next
Allows you to select a firmware image type you have downloaded and stored.
Possible selections are “other,” “image1,” “image2,” or “latest.”
Boot Image 1
Displays which flashbank is set to load an image when rebooting, or which
image to store when downloading.
Boot Image 2
See Boot Image 1.
Next Boot IP Address
Displays the IP address of the interface for the next boot.
Load Server Address
Displays the IP address of the load server for the configuration file and/or the
image file.
Config File Name
Displays name of the configuration file associated with the interface.
Image File Name
Displays the name of the firmware image file(s) associated with the interface.
Some agents in special situations may support a value which contains
multiple file names instead of a single file name. Multiple names are specified
as a list of file names separated by semicolons.
Next Boot Net Mask
Displays the subnet mask for the interface for the next boot.
Download
Allows you to download a new image to the agent. Possible values are “other”
(agent in unknown state), “running” (agent running after download), and
“download” (re-download a new image).
Reboot Agent
Allows you to reboot the agent.
Table 3-10 lists the possible values.
Table 3-10. Reboot Agent Values
Value Description
other agent in unknown or other state
running agent running