Specifications

What Is in This Chapter
Port Configurations Table
Configuration Views SynOptics 28000 Series Switches
3-4 Management Module Guide
Remote Fault
Displays the remote fault sensing of fiber ports. Possible vaules are “other”
(other or not known), “fault” (remote device signalled a fault condition) or
“nofault” (remote device signalled a no fault condition).
Only fiber ports will have a value of “fault” or “nofault.” All other port types
will have a value of “other.”
Connecting Device
Identifies the type of device to which the port is connected. Table 3-5 lists and
describes the possible devices.
For expansion ports, “other” means that there is no device connected. For all
other ports, the value “other” is returned for device types other than those
listed above.
Operational Type
Indicates the operational switch port type. The operational port type is the
outcome of LattisSpan protocol and is determined by the system. Table 3-6
lists and describes the possible types.
Table 3-5. Connecting Devices
Device Description
other other or not known
model514 Model 514 fiber transceiver
model515 Model 515 UTP transceiver
cascade Model 28K LattisSwitch Ethernet Switch
Table 3-6. Operational Types
Value Description
other other or not known
skip Skip this enumeration intentionally for providing
compatibility between different version of
LattisSpan.
actfeeder.active
feeder
The port is being used for host connectivity.
trunk The port is being used for interconnecting LAN
Switches in a community.
stbfeeder.standby
feeder
The port is being used as standby port for host
connectivity.