Specifications

What Is in This Chapter
Port Configurations Table
Configuration Views SynOptics 28000 Series Switches
3-2 Management Module Guide
Partition Status
Displays the partition status of the port. Possible values are “enabled”
(enables the port), “partition” (partitions the port), “other” (partition status
unknown). The value “partition” will survive resets of the host card, causing
the port to be partitioned indefinitely until the value “enabled” is written.
Partitioning a trunk port is not allowed.
Link Status
Displays the link status of the port. The values are “other” (other or not
known) “off” (link is not connected) “on” (link is connected). Ports will have a
value of “off” or “on.” All other port types will have a value of “other.”
Connector
Displays the type of connector that the port offers. Table 3-1 lists and
describes the possible types.
Media Type
Displays the media type for the port. Table 3-2 lists and describes the possible
types.
Link Type
Displays the type of link for the port. Table 3-3 lists and describes the possible
types.
Table 3-1. Connector Types
Type Description
other other or not known
rj45 RJ45 connector
fiber Fiber connector
expansionPort Expansion Port connector
Table 3-2. Media Types
Type Description
other other or not known
m10BaseT 10BaseT Ethernet
m100M 100M Ethernet
m10or100M 10BaseT and 100M switchable
m200e 200M expansion port