Specifications

Application View SmartSwitch Applications
Device Management Page 63 CyberSWITCH and SmartSwitch Access
SNMP table. The Device Information Table
contains the following entries:
Index
A value that uniquely identifies the device.
IfIndex
The ”ifIndex” value of the WAN connection group.
SessionIDs
The unique identifier of the last session when a
WAN device was in the active state.
State
The state of the device. Possible values are:
inactive, connecting, active, and disconnecting.
Description
A description of the device.
ConnectCtrl
The desired state of the WAN device. Possible
values are: connect, disconnect, and unknown.
ConnectType
The type of WAN connection. Possible values are:
digitalCircuit or analogCircuit.
L2Encapsulation
The type of Layer 2 encapsulation used when
connecting to this device. Possible values are: ppp
or unknown.
NumConnections
The current number of WAN connections to this
device.
CurrBandwidth
The aggregate bandwidth of all current
connections.
InitialBandwidth
The desired initial bandwidth (in bits per second)
used when calling this device. The system will
bring up enough connections to meet the
bandwidth requirement. The value only
represents dial type connections. It does not
include leased circuits.
MaxBandwidth
The maximum amount of bandwidth (in bits per
second) used when calling this WAN device.
HOSupport
Indicates whether an H0 connection can be used
when calling this WAN device.
ChargedUnits
The total number of charging units applying to
this device since this row was created.
SuccessCalls
Number of completed calls to this device.