Specifications

Application View SmartSwitch Applications
Device Management Page 55 CyberSWITCH and SmartSwitch Access
ISDN Common Configuration Table
View
Access: From the Icon Subviews menu for the
SSA_IsdnApp Application icon, select ISDN Common
Configuration.
This view contains the ISDN common table, which
displays configuration and operational
parameters for all ISDN signaling entries on this
managed device. Double-clicking any entry within
this table opens the ISDN Common Configuration
view, which allows you to set the SwitchVariant,
SwitchGeneric, and SwitchType values. The
table contains the following information:
SwitchVariant
The switch variant for all ISDN signalling entries.
Only certain values are valid for certain switch
types.
SwitchGeneric
The switch generic for all ISDN signalling entries.
OutCallDelay
The minimum delay (in milliseconds) between
outbound calls for all ISDN signalling entries.
BadCallDelay
The minimum delay (in milliseconds) between bad
outbound calls for all ISDN signalling entries.
ISDN Line Configuration Table View
Access: From the Icon Subviews menu for the
SSA_IsdnApp Application icon, select Line Information
View.
This view contains the ISDN Line Configuration
Table, which contains configuration and
operational information for all ISDN lines. This
information includes a LineId that identifies the
entry in the table. The remaining fields are flags
that indicate whether a trace should be initiated
at that level (e.g. L2Trace indicates whether a
trace should be initiated at Level 2).
ISDN Call Information View
Access: From the Icon Subviews menu for the
SSA_IsdnApp Application icon, select Call Information
View.
This view contains the ISDN Call Info Table,
which supplies the following information:
CallId
Call identification tag for each entry in the table.
SMUserConnId
The signaling method (SM) user's connection ID
for this call.
LineId
The line ID of this call.