Specifications

Application View SmartSwitch Applications
Device Management Page 45 CyberSWITCH and SmartSwitch Access
Module Information Table View
Access: From the Icon Subviews menu for the
SSA_CMMContApp Application icon, select Module
Information.
This table provides configuration and status
information about all CMM modules present on
each CMM board in this unit. Double-clicking on
any entry within this table opens the Module
Information view, which allows you to set the
Administrative Status for a selected module. The
Module Information Table View includes the
following information:
Module Id
A value that uniquely identifies the CMM module.
DpramSize
Size of the DPRAM (in bytes) on the CMM module.
SdramSize
Size of the SDRAM (in bytes) on the CMM module.
CpuType
Type of CPU, values are unknown, hitachish3,
and hitachish4.
CpuSpeed
CPU speed (in Megahertz).
CpuFwRev
Revision version number of the CPU’s firmware.
EpldID
EPLD identification number.
EpldRev
EPLD firmware revision number.
NumBadModems
The number of bad modems on the CMM module.
active All modules that belong to this board
are available for accepting calls.
leaving-service All modules that belong to this board
are functional but are no longer
available for accepting calls. (Existing
calls are allowed to terminate
normally.)
out-of-service None of the modules that belong to this
board are available for accepting calls
nor do they have any existing calls.
faulty All modules that belong to this board
are unusable.
impaired The board is otherwise active but one or
more modules are in the out-of-service,
initializing, testing, faulty, or impaired
states.
Table 22: Board Operational Status Values
Value Description