Specifications

Application View SmartSwitch Applications
Device Management Page 44 CyberSWITCH and SmartSwitch Access
HdlcBaseOrigATMCmdStr
The default or base set of AT commands to be
used when originating a High-Level Data Link
Control (HDLC) call.
HdlcBaseAnswerATMCmdStr
The default or base set of AT commands to be
used when answering an HDLC call.
HdlcOperOrigATMCmdStr
The operative set of AT commands to be used
when originating an HDLC call.
HdlcOperAnswerATMCmdStr
The operative set of AT commands to be used
when answering an HDLC call.
BoardAdminStatus
The administrative status of the CMM board. See
Table 21.
BoardOperStatus
The operational status of the CMM board. See
Table 22.
Table 21: Board Administrative Status
Values
Value Description
down All modems that belong to
this board are to be removed
from service immediately.
leave-service Each modem that belongs to
this board is to be removed
from service at the
completion of its current
call, if any.
up Each modem that belongs to
this module is available for
accepting calls.
upgrade All modules that belong to
this board are to be
reloaded with new software
and restarted.
Table 22: Board Operational Status Values
Value Description
initializing All modules that belong to this board
are booting up or in the process of a
software upgrade.
Table 21: Board Administrative Status Values
(Continued)
Value Description