Specifications

Application View CyberSWITCH Applications
Device Management Page 37 CyberSWITCH and SmartSwitch Access
InterHub Interface View
Access: From the Icon Subviews menu for the ih000App
Application icon, select InterHub Interface.
This view provides a table of the current
interfaces attached to the InterHub system and
specifies the operational status of each interface.
The table provides the following information:
ID
A unique value used to identify an entry within
this table.
Name
A name which, together with Slot and Port (both
described below), uniquely identifies the
interface.
Type
The type of interface. The possibilities are:
ethernet, basicRateDChannel,
basicRatePermanent, primaryRateDChannel,
primaryRatePermanent, v35, rs232, x25Access,
and frameRelayAccess.
Slot
The physical slot to which the interface is
attached.
Port
The physical port to which the interface is
attached. For RS232 interfaces, this number has
the following mapping: 1 = 1A, 2 = 1B, 3 = 2A, and
4 = 2B.
Status
The current operational status of the interface.
Possible values are: up or down.
ISDN B-Channel Usage Information
Access: From the Icon Subviews menu for the ih000App
Application icon, select ISDN Usage Monitor.
This view allows you to monitor B-Channel traffic.
It provides the following information:
B-Channels Available
The number of ISDN B-channels available for use.
Note that dedicated B-channels are not included
in this count.
Monitor Reset
This object acts as a reset flag for B-Channels
Highwater and Elapsed Time. It normally has a
value of false (2). When it is set to true (1), the
value of B-Channels Highwater is reset to the
current value of B-Channels In Use, and the
value of the Elapsed Time is reset to zero. The
value of this object is then returned to its normal
operating value of false (2).