Specifications

Application View CyberSWITCH Applications
Device Management Page 33 CyberSWITCH and SmartSwitch Access
Index
A unique value used to identify the data link.
Line Name
The value identifying the line that will provide the
connection for the data link.
LinkCES
The value of the Connection Endpoint Suffix
(CES), which is used by the IH000 system to
internally identify a data link.
LinkTEI
The Terminal Endpoint Identifier (TEI) for the
data link. A TEI is a Layer 2 (Q.921) value used to
address specific terminals connected to an ISDN
line. A TEI value may be assigned by the network
or pre-configured in the terminal.
LinkSPID
The Service Profile Identifier (SPID) for the data
link. A SPID is a Layer 3 (Q.931) value used
during ISDN terminal initialization to associate a
particular set of capabilities and/or features with
that terminal. A SPID value is supplied by the
ISDN service provider.
Directory
The phone number identifying this data link. It
will be compared with the Called Party
Information Element specified in the incoming
call to determine if this data link is to be used for
the incoming call connection. This object only
applies to DMS 100 Basic Rate lines.
VerifyDigits
The number of digits (beginning with the
rightmost digit) of the Called Party Information
Element specified in an incoming call to compare
with the number specified in Directory, to
determine if this data link is to be used for the
incoming call connection. This object only applies
to non-DMS 100 Basic Rate lines.
IH LAN View
Access: From the Icon Subviews menu for the ih000App
Application icon, select LAN Port Information.
This view contains a table which describes the
configurable Spanning Tree Protocol parameters
specific to each LAN port on the IH000 system.
The table provides the following information:
Port Number
A unique value identifying the IH000 LAN port for
which this entry contains Spanning Tree Protocol
configuration data.
Port Priority
The value assigned to the priority byte in the 2
byte Port ID.