Specifications

Application View CyberSWITCH Applications
Device Management Page 31 CyberSWITCH and SmartSwitch Access
SwitchType
The switch type used by the resource. Possible
values are: PRI_4ESS, PRI_5ESS, PRI_DMS100,
PRI_DMS250, PRI_SL100, NET5, BRI_5ESS,
BRI_LEGEND, BRI_DEFINITY, BRI_DMS100,
BRI_NI1, NTT, BRI_1TR6, and BRI_NET3_BT. For
resources that are not Basic Rate or Primary
Rate, this object will be NULL.
Variant
A string which further describes the capability
provided by a given switch type. Possible values
are: NO_VARIANT, NET5 NORWAY, NET5
SWEDEN, NET5 UK, and TELEOS_VARIANT. For
resources that are not Basic Rate or Primary
Rate, this object will be NULL.
GenericNo.
This value identifies the software generic 16
AT&T#4ESS. AT&T #4ESS switches incorrectly
coded an H0 channel map in generic 16 and
earlier switch software. Generic 17 software
corrects this problem. If the switch is using pre-
generic 17 software, this value will be 16. If the
switch is using pos-generic 16 software, this
value will be 17. If the switch is not an AT&T
#4ESS switch, this value will be 0.
IH Line View
Access: From the Icon Subviews menu for the ih000App
Application icon, select IH Line Information.
This view provides a table that specifies the
configuration for each of the lines available to the
IH000 system. A line is a physical connection
from the IH000 system to a switched network, a
dedicated network, or a local device. The table
provides the following information:
Index
A unique value that identifies the line.
Name
A unique name used to identify a line attached to
the IH000 system. This name can be up to 16
characters.
Type
The type of line. Possible values are: DEVICE,
NETWORK, ISDN, T1, and E1.
Slot
The value of Slot (see Slot (Page 30)) that
identifies the resource at which the line physically
terminates.
Port
A number that identifies the physical port at
which the line terminates. For RS232 lines, this