Specifications

Application View CyberSWITCH Applications
Device Management Page 30 CyberSWITCH and SmartSwitch Access
IH Resource View
Access: From the Icon Subviews menu for the ih000App
Application icon, select IH Resource Information.
This view provides a table that specifies the
configuration for each of the resources plugged
into the IH000 system. A resource is a computer
adapter card that provides the physical interface
for the attachment of lines to the IH000 system.
The table provides the following information:
Index
A unique value that identifies a resource within
the table.
Type
The type of the Resource. Possible values are:
BASICRATE, BASICRATE_NET, T1_E1_PRI,
EXPANDER, V35, RS232, ETHERNET_2 (2-port
Ethernet), and ETHERNET_1 (1-port Ethernet).
Slot
The number of the slot in which the resource
resides.
MemBase
The base address (in hex) within the memory map
system at which the shared memory for a WAN
resource resides.
I/IoBase
The starting I/O location (in hex) within the I/O
space system at which the addressable I/O
registers for a WAN resource reside.
InptNo
The interrupt number within the range of
software interrupts to which the interrupt
functions for a WAN resource are vectored.
SyncType
Each framed transmission line requires a clock
source from which it must derive bit timing and
channel timing relative to the start of a frame. If
the value for this object is SLAVE, the clocking is
derived from the received signal. If the value for
this object is MASTER, the line must provide its
own clocking from an internal source. For
resources which are not Basic Rate or Primary
Rate, this object will be NULL.
Model Information Model Information view for the selected
application, see Model Information Views
on Page 70.
Table 17: InterHub Icon Subviews Menu
Option Opens the...