Specifications

Device Views Interface Device View
Device Management Page 20 CyberSWITCH and SmartSwitch Access
Interface Type Label
This label identifies the type of interface- e.g.,
Ethernet, FDDI, Other, etc. For the SmartSwitch
devices, double-click this label to access the
Device Configuration View on Page 67.
MAC Address Label
This label displays the physical (MAC) address of
the interface. For the SmartSwitch devices,
double-click the label to open the Interface
Address Translation table, which cross-references
network addresses (IP addresses) to physical
(MAC) addresses for selected nodes between
networks. Double-clicking on any column entry
opens an address-specific Address Translation
Table Information view. This view provides the
same information as the corresponding row for
the IF Address Translation table, but allows you
to modify field values. For the CyberSWITCH
devices, double-click this label to open the Model
Information view for the application selected (see
Model Information Views on Page 70).
Network Information Label
This label displays the IP address for the
interface. Double-click the label to open the
Secondary Address Panel on Page 22, which
allows you to change the address and mask for
this interface.
Gauge Label
This label displays whichever performance
statistic has been selected in the Gauge Control
panel for this device’s interfaces (see SPECTRUM
Views for more information). Double-click this
label to open the CSIIfPort Performance View on
Page 65.
Network Type Label
This label identifies the type of network the
interface is connected to. Double-click the label to
open the Model Information view for the
application selected (see Model Information Views
on Page 70).