Technical data

What Is in This Chapter
Port Management (Port ConÞguration View Only)
ConÞgurationViews MicroMMAC-E
3-6 Management Module Guide
Ports Operational
The number of operational ports on this module.
Module Ports
Setting this Þeld to Enable enables all the ports on this module. Disable will
disable all ports on the module. You can also enable module ports by selecting
Enable All Module Ports from the Icon Subviews menu for the module.
Port Management (Port ConÞguration View Only)
This area of the Port ConÞguration View provides the following information
for the selected port:
Port Id
The number of the module port.
Administrative Status
The desired operational state of the port (Enable or Disable). You can update
this Þeld.
Operational Status
The current operational state of the port (Not-Operational or Operational).
Segmentation Status
The current segmentation state of the port (Not-Segmented or Segmented).
Link Status
The current link state of the port (Not-Linked, Linked, or Not-Applicable).
Topological State
The current port topological state (Station or Trunk).
Set Topological State
The desired port topological state (Not_Forced or Forced_Trunk). You can
update this Þeld.
Trap ConÞguration
This area of the Module and Port ConÞguration View allows you to enable or
disable any of the following types of traps: