Specifications

Events and Alarms
Event and Alarm Messages ESX Devices
4-10 Management Module Guide
CsEvFormat/Event000d0133
{d "%w- %d %m-, %Y - %T"} Broadcast
threshold exceeded {I 1} total packets in {I
3} seconds on repeater network {I 5} of {m}
({t}). (event [{e}])
CsPCause/Prob000d0133
REPEATER BROADCAST THRESHOLD
EXCEEDED This trap will be generated
when the broadcast (packets per time
interval) has been exceeded for the
repeater.
CsEvFormat/Event000d0135
{d "%w- %d %m-, %Y - %T"} Port Security
Status is {T LockStatus 3} for port #{I 2 },
located in port group #{I 1} of {m} ({t}).
(event [{e}])
CsPCause/Prob000d0135
PORT SECURITY STATUS This alarm is
generated when a change in the lock
status for a particular port occurs.
CsEvFormat/Event000d0136
{d "%w- %d %m-, %Y - %T"} Device
configuration change reported by {m} ({t}).
The module in slot {I 1} has been inserted.
CsPCause/Prob000d0136
A module has been inserted into this hub.
CsEvFormat/Event000d0137
{d "%w- %d %m-, %Y - %T"} Alternate
Path Repeater Management has been
enabled for {m} of type {t} Network
Address Synchronized to {O 1}. - (event
[{e}])
CsPCause/Prob000d0137
Alternate Path Repeater Management
functionality has been enabled for this
repeater model.
CsEvFormat/Event000d0138
{d "%w- %d %m-, %Y - %T"} Alternate
Path Repeater Management has been
enabled for {m} of type {t} No Network
Address Syncronization. - (event [{e}])
CsPCause/Prob000d0138
Alternate Path Repeater Management
functionality has been enabled for this
repeater model.
CsEvFormat/Event000d0139
{d "%w- %d %m-, %Y - %T"} Alternate
Path Repeater Management has been
disabled for {m} of type {t} Network
Address Syncronized to {O 1}. - (event
[{e}])
CsPCause/Prob000d0139
Alternate Path Repeater Management
functionality has been disabled for this
repeater model.
CsEvFormat/Event000d013a
{d "%w- %d %m-, %Y - %T"} Alternate
Path Repeater Management has been
disabled for {m} of type {t} No Network
Address Syncronization. - (event [{e}])
CsPCause/Prob000d013a
Alternate Path Repeater Management
functionality has been disabled for this
repeater model.
Table 4-1. Device Events and Alarms