Specifications

Events and Alarms
Event and Alarm Messages ESX Devices
4-8 Management Module Guide
CsEvFormat/Event000d0121
{d "%w- %d %m-, %Y - %T"} Broadcast
threshold exceeded {I 1} total packets in {I
3} seconds on the module in slot {I 5} of
{m} ({t}). (event [{e}])
CsPCause/Prob000d0121
MODULE BROADCAST THRESHOLD
EXCEEDED This trap will be generated
when the broadcast (packets per time
interval) has been exceeded for the given
module.
CsEvFormat/Event000d0122
{d "%w- %d %m-, %Y - %T"} Broadcast
threshold exceeded {I 1} total packets in {I
3} seconds on port {I 7} on the module in
slot {I 5} of {m} ({t}). (event [{e}])
CsPCause/Prob000d0122
PORT BROADCAST THRESHOLD
EXCEEDED This trap will be generated
when the broadcast (packets per time
interval) has been exceeded for the given
port.
CsEvFormat/Event000d0125
{d "%w- %d %m-, %Y - %T"} System
Voltage Low condition has been detected
by {m} ({t}). (event [{e}])
CsPCause/Prob000d0125
The internal 5 volt line of the system is
low. The voltage low condition indicates
that either the power supplies are failing
or there is not enough power available to
the host modules. This is a serious
condition and should be addressed
immediately.
CsEvFormat/Event000d0126
{d "%w- %d %m-, %Y - %T"} System
Voltage Normal condition has been
detected by {m} ({t}). (event [{e}])
CsPCause/Prob000d0126
The problem with the internal 5 volt line
of the system has been corrected. The
system voltage condition has returned to
normal.
CsEvFormat/Event000d0127
{d "%w- %d %m-, %Y - %T"} An EPIM has
been removed from port {I 3} on module in
slot {I 1} of {m} ({t}). (event [{e}])
CsPCause/Prob000d0127
An Ethernet Port Interface Module
(EPIM) has been physically removed.
CsEvFormat/Event000d0128
{d "%w- %d %m-, %Y - %T"} An (EPIM)
has been inserted into port {I 3} on module
in slot {I 1} of {m} ({t}). (event [{e}])
CsPCause/Prob000d0128
An Ethernet Port Interface Module
(EPIM) has been physically inserted.
Table 4-1. Device Events and Alarms