Specifications

9031586 E3 Event and Alarm Messages
4-5
Events and Alarms
CsEvFormat/Event000d010f
{d "%w- %d %m-, %Y - %T"} User defined
traffic threshold - {I 1} packets within {I 3}
seconds, exceeded on module {I 5} of {m}
({t}). (event [{e}])
CsPCause/Prob000d010f
The packet rate on this module has
exceeded user defined limits. The device(s)
attached to this module may have an
application which requires a large amount
of network bandwidth. If the application
requires a large amount of bandwidth, a
bridge or router could be used to logically
separate various network segments. Use
port level thresholds to further
troubleshoot to a device level.
CsEvFormat/Event000d0110
{d "%w- %d %m-, %Y - %T"} Error
threshold exceeded. An error threshold, of
{I 1}% of total packets in {I 5} seconds,
exceeded on module in slot {I 7}. (event
[{e}])
CsPCause/Prob000d0110
This threshold will indicate that a
malfunctioning device is present on this
module or that a cable fault exists. A port
level threshold should be set to further
troubleshoot to the offending node.
CsEvFormat/Event000d0111
{d "%w- %d %m-, %Y - %T"} Collision
threshold exceeded. The number of
collisins per total packets within the time
base of {I 3} seconds has been exceeded on
the module in slot {I 5} of {m} ({t}). (event
[{e}])
CsPCause/Prob000d0111
Collisions are caused by many nodes
contending for the network or cabling
faults. Use port level thresholds to further
troubleshoot to a device level.
CsEvFormat/Event000d0112
{d "%w- %d %m-, %Y - %T"} Traffic
threshold, {I 1} packets per {I 3} seconds,
exceeded on port {I 7} on module in slot {I
5} of {m} ({t}). (event [{e}])
CsPCause/Prob000d0112
The device(s) attached to this port may
have an application which requires a large
amount of network bandwidth. If the
application requires a large amount of
bandwidth, a bridge or router could be
used to logically separate various network
segments.
CsEvFormat/Event000d0113
{d "%w- %d %m-, %Y - %T"} Error
threshold exceeded. An error threshold, of
{I 1}% of total packets in {I 5} seconds,
exceeded on port {I 9} on module in slot {I
7} of {m} ({t}). (event [{e}])
CsPCause/Prob000d0113
The device(s) attached to this port could
have a hardware failure where it
transmits invalid packets, or the cable
segment attached to this port may have a
problem. Check cable for loose connection
or continuity problems.
Table 4-1. Device Events and Alarms