Specifications

9031586 E3 Event and Alarm Messages
4-3
Events and Alarms
CsEvFormat/Event000d0001
{d "%w- %d %m-, %Y - %T"} {m} of type {t}
has reported a root change (event [{e}]).
CsPCause/Prob000d0001
This bridge has become the new root of
the Spanning Tree.
CsEvFormat/Event000d0002
{d "%w- %d %m-, %Y - %T"} {m} of type {t}
has reported a network topology change
(event [{e}]).
CsPCause/Prob000d0002
A port has transitioned from the Learning
state to the Forwarding state, or from the
Forwarding state to the Blocking state.
CsEvFormat/Event000d0101
{d "%w- %d %m-, %Y - %T"} Port {I 3} on
module in slot {I 1} of {m} ({t}), has
segmented. (event [{e}])
CsPCause/Prob000d0101
The port has made 32 consecutive
attempts to transmit and which resulted
in a collision each time or the port
collision detector was turned on for longer
than 2.4 milliseconds. Either of these
collision occurrences are caused by a
cabling problem of extremely high rates of
traffic on the segment the port is attached
to.
CsEvFormat/Event000d0102
{d "%w- %d %m-, %Y - %T"} Port {I 3} on
module in slot {I 1} of {m} ({t}), has
unsegmented. (event [{e}])
CsPCause/Prob000d0102
The port has transmitted or received a
valid packet. This can occur when a cable
or termination fault has been corrected.
Unsegmenting also can occur on a port
that previously was not in use.
CsEvFormat/Event000d0103
{d "%w- %d %m-, %Y - %T"} Network
configuration change reported by {m} ({t}).
Device linked to port {I 3} on module in
slot {I 1}. (event [{e}])
CsPCause/Prob000d0103
A device supporting link integrity, fiber
optic or twisted pair, has made a valid
connection (link) to this port.
CsEvFormat/Event000d0104
{d "%w- %d %m-, %Y - %T"} Network
configuration change reported by {m} ({t}).
Device previously linked to port {I 3} on
module in slot {I 1} has ceased to transmit
link integrity pulse. (event [{e}])
CsPCause/Prob000d0104
A device previously linked with this port
has been removed, powered down, or the
cable segment has a fault.
CsEvFormat/Event000d0105
{d "%w- %d %m-, %Y - %T"} New source
address {X 5}, is detected on {m} ({t}), port
{I 3} of module in slot {I 1}. (event [{e}])
CsPCause/Prob000d0105
A device, previously linked or not, has
transmitted a packet that was received on
this port. The device is either new or has
been powered up but not transmitted a
packet with the aging time period.
Table 4-1. Device Events and Alarms