Specifications

Device Configuration View
Configuration Views ESX Devices
3-2 Management Module Guide
Device Configuration View
This view provides information on the configuration and operating status of
the devices and allows you to change the network connections. It provides
three fields as described below.
Contact Status
Indicates whether a connection with the device has been established.
Firmware Revision
The firmware revision for the device.
Hardware Revision
The hardware revision for the device.
This view also provides buttons (Component Table, Download
Application, Trap Table, and Date/Time) that access SPMA applications
that allow you to configure the devices. For details on the views accessible
from these buttons, refer to the SPECTRUM Portable Management
Application Tools Guide.
Interface Configuration Table
This table provides the following configuration information for each interface
or port.
Number of Interfaces
The number of interfaces or ports available for the devices.
Index
The interface or port number.
Type
The type of hardware interface or port, for example, Ethernet, FDDI, etc.
Phy Address
The Ethernet (MAC) address of the interface or port.
Max Frame Size
The maximum frame size for the interface or port (e.g., 4500).
Oper Status
The current operational state of this interface or port (Up, Down, or Testing).