Specifications

Chassis Device View
Chassis Module Icon
Device Views ESX Devices
2-12 Management Module Guide
Model Identification Labels
These labels provide the following information.
Slot Number
Identifies the module’s location in the chassis. Double-click this label to open
the Notes view.
Model Type
Identifies the type of module being displayed. Double-click this label to open
the Device Configuration View described on Page 3-2.
Chassis Module Icon Subviews Menu
Table 2-6 describes each of the device-specific Icon Subviews menu selections
available for this device. See Chapter 1 for information on accessing device-
specific subviews.
Application Label
This label displays the application selected and provides access to its Icon
Subviews menu. The application selected determines the information
displayed and the menu selections available. The default application for this
view is Bridging.
To select the application, highlight the Chassis Module icon and select View >
Icon Subviews > Application Display.
Double-click the Application label to open the Performance view described in
the Operator’s Reference.
Table 2-6. Module Icon Subviews Menu
Menu Selection Description
Module Notes Opens the Notes view described in the Operator’s
Reference.
Application Opens the Application view described in Chapter 5.
Configuration Opens the Device Configuration View described on
Page 3-2.
Model Information Opens the Model Information view described in the
Operator’s Reference.
Application Display Allows you to select the Primary Application, either
Bridging or Physical.