Specifications

9031586 E3 Device Views
2-9
Chassis Device View
Selected Attribute
This panel allows you to select the statistical attribute displayed on the
Interface icon’s Gauge label. The label changes color to reflect the attribute
selected.
Gauge Type
This panel allows you to select either a numeric or linear display on the Gauge
label.
Gauge Buttons
The following describes the Gauge buttons:
Applies the current settings to the Gauge label temporarily but does not save
the settings.
Returns the settings to the previously saved values.
Saves the current settings while SpectroGRAPH is running. Settings return to
default when you restart SpectroGRAPH.
Closes the Gauge Control Panel.
Returns the settings to the SPECTRUM default.
Chassis Device View
This section describes the information available from the Chassis Device view,
which provides access to detailed information about the chassis, each module,
the applications, and the ports. Figure 2-4 and Figure 2-5 show examples of
the Chassis Device view for the ESXMIM and ESX-1320/80.
Apply
Reset
Keep Settings
Close
Default