Specifications

Interface Device View
Interface Options Panel
Device Views ESX Devices
2-6 Management Module Guide
Interface Options Panel
This area of the Interface Device view allows you to modify the presentation of
a highlighted Interface icon. Double-click a non-text area of this panel to open
the Gauge Control Panel, described below. The Interface Options panel
provides the following information:
Filter
Allows you to select the application to be displayed by the Interface icons. You
can leave the default, which is Physical (MIB II), or select Bridging. You can
also select other applications (purchased separately) such as IP routing if the
SPECTRUM Routing Services Management Module is loaded. For more
information, refer to the Routing Services Management Module Guide.
Network Information
Allows you to select the type of information displayed in the Network
Information label of the highlighted Interface icon. Possible selections are
ADDRESS, NAME, or MASK.
Interface Description
Provides a description of the highlighted interface. If no interface is
highlighted, this field is empty.
Gauge Control Panel
This panel (Figure 2-3) allows you to change the type of statistical information
displayed on the Gauge label of the Interface icon. To access the Gauge
Control Panel, double-click the background of the Interface Options panel or
do the following:
1. Highlight the Interface Options panel.
2. From the View menu, select Icon Subviews -> Gauge Control Panel.