Specifications

SmartSwitch ATM Switch Reference Manual 2-67
Console Commands ELAN
[Distribute] Establishes the nature of the control
distribute VCC. Possible values are: All or
Proxy. All establishes control distribute
VCC to all clients. Proxy establishes
control distribute VCC only to proxy
clients.
All, Proxy Proxy
Output Parameter Description
[ELAN Number] Number of the ELAN.
[LECS Address] ATM address of the LECS that serves the ELAN.
[LES Address] ATM address of the LES that serves the ELAN.
[ELAN Name] Name of the ELAN.
[ELAN Type] Type of the ELAN.
[MTU] Maximum transfer unit for the clients joining the ELAN.
[Connection Method] Type of connection used. (Same as the [ConnectMethod] input parameter.)
[Distribute VPI/VCI] VPI/VCI values of the control direct VCC or multicast send VCC.
[Distribute Method] Whether the control distribute VCC is established for all clients or only proxy clients.
[Multipoint] Indicates whether control distribute VCC is PMP (point-to-multipoint) or PTP
(point-to-point). Possible values are: Yes or No.
[Error Logging] Whether or not the BUS, LECS, and LES error logs are enabled.
[Min TD Negotiation] Whether or not minimum acceptable traffic descriptor negotiation is enabled.
Input Parameter Description Value/Field Size Default