Specifications

2-60 SmartSwitch ATM Switch Reference Manual
CoreDump Console Commands
CoreDump
Use CoreDump to dump the system CPU and/or common DRAM in the event of a system failure. The core is dumped
to a file specified on a local Ethernet host. To use CoreDump, the Ethernet host must run TFTP server software, and
you must have write access to the TFTP directory.
Operators
modify, show
Parameters
Input Parameters Description Value/Field Size Default
[EnableCoreDump] Enables core dump. Y (Yes), N (No) N
[ServerIP] IP address of host to which the core is dumped. No default
[CoreDumpFile] Full pathname of the file to which the core is dumped. No default
[userName] Login name on the host to which the core is dumped.
The user should have write access to the directory on
the host specified.
No default
[UserPassword] Password on the host. No default
Output Parameter Description
[CoreDumpEnabled] Indicates whether or not core dump is enabled. (Same as the [EnableCoreDump] input
parameter.)
[CoreDumpServerIP] IP address of host to which the core is dumped. (Same as the [ServerIP] input parameter.)
[CoreDumpFile] Full pathname of the file to which the core is dumped.