Specifications

2-58 SmartSwitch ATM Switch Reference Manual
Config Console Commands
Config
Use Config to erase the configuration information on the SmartSwitch 6500. Before using the clear config
command, you should back up the switch configuration using the
backup switch command.
Operators
clear, flush
Parameters
This attribute has no input or output parameters. Just enter clear config at the switch prompt.
Descriptions
Examples
switch_prompt # clear config
You should backup your configuration using the "backup switch" command, in case
you want to recover this configuration
Continuing will permanently erase the current switch configuration,
and requires a switch reboot.
Are you sure this is what you want to do?
Confirm(y/n)?:y
Configuration cleared.
Rebooting is required to ensure correct operation,
Do you want to reboot now?
Confirm(y/n)?:y
Operator Parameters/Permissions Description
clear
config
Administrator Erases all switch configuration information, including
Ethernet interface address, IP/ATM VLAN and ELAN
configurations, signaling configuration, port configurations,
and so on.