Specifications

2-56 SmartSwitch ATM Switch Reference Manual
Community Console Commands
Community
Use Community to group NMS (network management system) hosts by privilege level. Hosts are collectively called
communities. Host privilege levels determine the type of information access permitted by the switch. The switch
provides access to the information only if the request comes from a community configured with the necessary
privileges.
Operators
add, delete, show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[Name] SNMP community name. Needs to be
defined on the switch to access SNMP.
64 characters No default
[IPAddr] IP address of the host or hosts that can use
this community name. Entering 0.0.0.0
allows access by any host.
Dot decimal/
7-15 characters
No default
[Privilege] Privileges associated with this community. Read, Write, Read-write Read
Output Parameter Description
[Community Name] SNMP community name. (Same as the [Name] input parameter.)
Operator Parameters/Permissions Description
add
community
[Name] <communityname>
[IPAddr] <ipaddress>
[Privilege] <privilege>
Administrator
Creates a community on the switch.
delete
community
[Name] <communityname>
[IPAddr] <ipaddress>
Administrator
Removes a community from the switch.
show
community
Administrator Displays all communities configured on the switch.