Specifications

2-54 SmartSwitch ATM Switch Reference Manual
ClientVC Console Commands
ClientVC
Use ClientVC to display VCs associated with ARP mappings cached by LANE or IP/ATM clients on the switch.
ClientARP is similar to ClientVC but does not show the VPI/VCI corresponding to a route to a destination client.
Note Clients on the switch are called local clients.
Operator
show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the local client. 0-125 or All All
Output Parameter Description
[MAC Address] MAC address of the LANE destination client.
[IP Address] IP address of the IP/ATM destination client.
[VPI/VCI] VPI/VCI values of control direct VCC or multicast Send VCC to the destination client.
[ATM Address] ATM address of the LANE or IP/ATM destination client.
Operator Parameters/Permissions Description
show
clientvc
[ClientNumber] <clientnumber>
All
Displays VC details for local IP/ATM or LANE clients in
addition to client ARP mapping details. For IP/ATM, the
destination IP address appears; for LANE, the destination
MAC address appears. The destination address is what is
located at the other end of the VC.