Specifications

2-48 SmartSwitch ATM Switch Reference Manual
ClientARP Console Commands
ClientARP
Use ClientARP to display the ARP table maintained by each LANE or IP/ATM client on the switch. For a LANE client,
the table contains mappings of MAC to ATM addresses for destination clients. The mappings are supplied by the ARP
server of each ELAN to which the LANE client connects. For an IP/ATM client, the table contains mappings of IP to
ATM addresses for destination clients. The mappings are supplied by the ARP server of each IP/ATM VLAN to which
the IP/ATM client connects. The LANE and IP/ATM clients cache the mappings to avoid repeated address resolution
requests to ARP servers.
Note Clients on the switch are called local clients.
Operators
show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the local client. 0-125 or All All
Output Parameter Description
[MAC Address] MAC address of the LANE destination client.
[IP Address] IP address of the IP/ATM destination client.
[ATM Address] ATM address of the LANE or IP/ATM destination client.
Operator Parameters/Permissions Description
show
clientarp
[ClientNumber] <clientnumber>
All
Displays details about LANE or IP/ATM client ARP entries.