Specifications

SmartSwitch ATM Switch Reference Manual 2-45
Console Commands Client
Descriptions
[LECS Address]
</d>
ATM address of the LECS.
[LES Address]
</d>
ATM address of the LES.
[LAN Type]
</d>
Type of ELAN.
[MTU]
</d>
Maximum transfer unit assigned for this client.
[IP NetMask]
</d>
IP netmask assigned to the client.
Operator Parameters/Permissions Description
activate
client
[ClientNumber] <clientnumber>
Administrator
Activates a client on the switch (same as the
restart client
command).
deactivate
client
[ClientNumber] <clientnumber>
Administrator
Deactivates a client on the switch.
delete
client
[ClientNumber] <clientnumber>
Administrator
Removes a client from the switch.
restart
client
[ClientNumber] <clientnumber>
Administrator
Restarts a client on the switch. If a client fails to successfully
join a VLAN, you can restart the client to retry. The switch
software, on a periodic basis, automatically tries to restart
clients that have not successfully joined. Enter
show client
to confirm that the client(s) have restarted.
show client
(/d)
[ClientNumber] <clientnumber>
All
Displays the details of a client on the switch. You can obtain
more details of all the clients on the switch by adding
/d to
the end of the command. For example,
show client /d.
Output Parameter Description