Specifications

2-44 SmartSwitch ATM Switch Reference Manual
Client Console Commands
Client
Use Client to manage LANE and IP/ATM clients on the switch. Clients on the switch are called local clients.
Note Use the LANEClient attribute to add or modify a LANE client. Use the
IPATMClient attribute to add or modify an IP/ATM client.
Operators
activate, deactivate, delete, restart, show
Parameters
In the Output Parameter table below,
(
</d>
)
appears next to parameters that are available only through the show
client /d
(detailed) command.
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the local client. 0-125 or All All
Output Parameter Description
[Client] Number of the local client. (Same as the [ClientNumber] input parameter.)
[Type] Type of client.
[IP Address] IP address of client.
[Server Type] Specifies what server type the client is on.
[Server Conn] Status of connection the client has with the server. Possible values are:
Established and Shutdown.
[Status] Current status of the client.
[Client State]
</d>
Status of where the client is in the process of making a connection.
[Client Address]
</d>
ATM address of the client.
[LAN Name]
</d>
ELAN name for this client.
[LECS Addr Source]
</d>
ILMI, well-known address, or LECS address.