Specifications

SmartSwitch ATM Switch Reference Manual 2-35
Console Commands CacInfo
CacInfo
Use CacInfo to display bandwidth allocated to switch ports per service category.
Operators
show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch.
You can specify a physical
or virtual port.
A1 to B4 (physical-2500 family),
A1.n to B4.n (virtual-2500 family),
1A1 to 8B4 (physical-6500),
1A1.n to 8B4.n (virtual-6500),
or All
All
[BandwidthUnit] Unit for specifying
bandwidth.
CPS (cells per second),
KBS (Kbits per second),
MBS (Mbits per second),
or PER (percentage)
CPS
Output Parameter Description
[Port#] Port number on the switch. (Same as the [PortNumber] input parameter.)
[Total BW] Available physical link bandwidth (in bandwidth units specified as input parameter).
[Total BW Allocated] Bandwidth allocated on this port.
[BwAlloc for
ServiceCategory]
Bandwidth allocated for each service category. Supported service categories are:
CBR (constant bit rate), UBR (unspecified bit rate), RTVBR (realtime variable bit
rate), NRTVBR (non-realtime variable bit rate), ABR (available bit rate).
Operator Parameters/Permissions Description
show cacinfo
[PortNumber] <portnumber>
[BandWidthUnit] <bandwidthunit>
Administrator
Displays port bandwidth per service category.