Specifications

2-32 SmartSwitch ATM Switch Reference Manual
BUStype Console Commands
BUStype
Use BUStype to enable/disable intelligent BUS mode.
Note If intelligent BUS mode is enabled, a unicast packet sent to the BUS is forwarded
only to the LANE client whose destination address is specified in the packet. If
intelligent BUS mode is not enabled, a unicast packet sent to the BUS is forwarded
to all LANE clients connected to the BUS.
Operators
modify
Parameters
This attribute has no output parameters.
Descriptions
Examples
switch_prompt # modify bustype
IntelligentBUSMode(OFF) : on
BUS Type Set to Intelligent Mode
switch_prompt #
Input Parameter Description Value/Field Size Default
[IntelligentBUSMode] Enables/disables intelligent BUS mode. Off, On Off
Operator Parameters/Permissions Description
modify bustype [IntelligentBUSMode]
<intelligentbusmode>
Administrator
Sets intelligent BUS mode.