Specifications

SmartSwitch ATM Switch Reference Manual 2-25
Console Commands BUSELAN
Descriptions
[ATM Address] ATM address of the ELAN.
[Max Frame Size] Maximum transfer unit assigned for this client. (Same as the [MTU] input parameter.)
[Connection Method] Type of connection used. (Same as the [ConnectMethod] input parameter.)
[Distribute VPI/VCI] VPI/VCI values of control direct VCC or multicast send VCC.
[ELAN Type] Data-link type used by the ELAN.
[Multipoint] Indicates whether control distribute VCC is PMP (point-to-multipoint) or PTP
(point-to-point).
[Error Logging] Whether or not BUS error log is enabled.
[Min TD Negotiation] Whether or not minimum TD negotiation is enabled.
Operator Parameters/Permissions Description
add buselan
[ELANNumber] <elannumber>
[ELANName] <elanname>
[ConnectMethod] <connectmethod>
[ELANType] <elantype
[Multipoint] <distributevcctpe>
[MTU] <maximumframesize>
[ErrorLogEnable] <errorlogenable>
[MinimumTDEnable] <minimumtdenable>
[ForwardPeakCellRate]
<forwardpeakcellrate>
Administrator
Creates a BUS on a specified ELAN. If the
corresponding LESELAN exists, then the added
BUSELAN should have similar characteristics.
delete
buselan
[ELANNumber] <elannumber>
Administrator
Removes the BUS from a specified ELAN and
drops clients connected to it.
modify
buselan
[ELANNumber] <elannumber>
[ELANName] <elanname>
[ConnectMethod] <connectmethod>
[ELANType] <elantype>
[Multipoint] <distributevcctpe>
[MTU] <maximumframesize>
[ErrorLogEnable] <errorlogenable>
[MinimumTDEnable] <minimumtdenable>
[ForwardPeakCellRate]
<forwardpeakcellrate>
Administrator
Changes the behavior of the BUS parameters for a
specified ELAN. The specified ELAN is then
deleted and recreated. If the corresponding
LESELAN exists, then the modified BUSELAN
should have the same characteristics as that
existing LESELAN because their parameters need
to match.
Output Parameter Description