Specifications

3-4 SmartSwitch ATM Switch Reference Manual
go Command Boot Load Commands
Examples
=>df s
You've requested a Switch Software download
Are you sure?(Y/N)y
Initializing ethernet...
Starting Bootp...
Boot file: c:\tftpboot\switch.ima
Using TFTP to get bootfile "c:\tftpboot\switch.ima" .
............................................................................
............................................................................
............................................................................
.............................
...............................
............................................................................
............................................................................
...............................................
Validity checks of the Switch Software Downloaded file...
All Validity checks OK
Programming downloaded image into Switch Software section, please wait...
New Switch Software programmed successfully
=>
go Command
Use the go command to exit the boot load prompt and run switch software (with or without POST).
Parameter Explanation
s
Bypass POST and go directly to switch software.
p
Run POST, and then run switch software.
none Same as
s; bypass POST and go directly to switch software.