Specifications

2-334 SmartSwitch ATM Switch Reference Manual
TrafficDescriptor
[SCRCLP0] Sustainable cell rate
CLP = 0
(KiloBits per second).
Zero or positive integer 0
[MBSCLP0+1] Maximum burst size
CLP = 0+1 (KiloBits).
Zero or positive integer 0
[MBSCLP0] Maximum burst size
CLP = 0 (KiloBits ).
Zero or positive integer 0
[QOSClass] QOS class. Any of the following numbers: 0, 1, 2, 3, 4, 5
Unspecified (0)
Class1 (1)
Class2 (2)
Class3 (3)
Class4 (4)
Class5 (5)
1
[AALType] ATM adaptation layer
type.
Any of the following numbers: 1, 2, 3, 5, 16
AAL1 (1)
AAL2 (2)
AAL3/4 (3)
AAL5 (5)
Unspecified (16)
5
Output Parameter Description
[TD#] Unique identifier for each traffic descriptor. (Same as the [TrafficDescriptorIndex] input
parameter.)
[Traff Type] Service category supported. (Same as the [TrafficType] input parameter.) Possible values
are: CBR, UBR, RTVBR, NRTVBR, or ABR.
[Desc Type] Traffic descriptor type. (Same as the [TrafficDescriptorType] input parameter.) Possible
values are: 2 (PeakCellRate CLP0+1), 3 (PeakCellRate CLP0+1, PeakCellRate CLP0), 4
(PeakCellRate CLP0+1,PeakCellRate CLP0, Tag CLP = 1), 5 (PeakCellRate CLP0+1,
SustCellRate CLP0+1, MaxBurstSize CLP0+1), 6 (PeakCellRate CLP0+1,
SustCellRate CLP0, MaxBurstSize CLP0), 7 (PeakCellRate CLP0+1, SustCellRate CLP0,
MaxBurstSize CLP0, Tag CLP = 1), or 11 (BestEffort).
[Qos] Quality of service class. (Same as the [QOSClass] input parameter.) Possible values are 0
(Unspecified), 1 (Class 1), 2 (Class 2), 3 (Class 3), or 4 (Class 4).
[Peak Cell Rate
CLP_0]
Peak cell rate CLP=0 (in kilobits per second).
Input Parameter Description Value/Field Size Default